1比1现金棋牌

Location: Home > Products > Insulation Board Series >

Products
Insulation board
name:

Insulation board

description:

Insulation boards are widely used in substations, power plants, distribution rooms, test roommates, and field live operations. They are mainly made of rubber-based insulation materials, and there should be no harmful irregularities on the upper and lower surfaces of the insulation pads.

13831205665 13833216028 24-hour hotline 13831205665 13833216028

Detailed introduction:
Insulation board; Insulation board

Insulation boards are widely used in substations, power plants, distribution rooms, test roommates, and field live operations. They are mainly made of rubber-based insulation materials, and there should be no harmful irregularities on the upper and lower surfaces of the insulation pads. Harmful irregularities refer to one of the following characteristics, that is, defects that damage uniformity and damage the smooth contour of the surface, such as pinholes, cracks, local bulges, cuts, inclusions of conductive foreign bodies, creases, voids, bumps and corrugations, casting marks . Harmless irregularities are surface irregularities formed during the production process.

Insulation board use range and storage method: widely used in substations, power plants, power distribution rooms, test roommates and field live operation. It should be stored in a dry and ventilated environment, away from heat sources, and more than 20cm away from the ground and walls. Avoid being contaminated by acids, alkalis and oils. Do not expose to direct sunlight.

Insulation board use:

1. Can be used for laying floors and workbenches, etc. Its elastic modulus is 3-6MPa 1. It has very good elasticity. Crystals are formed by stretching under external force. Very self-reinforcing; large average molecular weight.

2. Rubber is a crystalline rubber. This gives it higher mechanical strength. Therefore, it has good processing performance. Good dispersibility and co-solubility with the compounding agent.

3. Because of its wide molecular weight distribution. It is easy to misuse with fillers and most other rubbers, and it is easy to perform mechanical processing and paste molding such as calendering and extrusion.

4. Have good air permeability, water resistance, cold resistance, electrical insulation and thermal insulation properties of insulating rubber plate.

5. Resistance to aging is a fatal weakness of rubber.